Like your Z, this site is always underconstruction. :-)

Fiberglass replacement for 240z dash

Weighs 10lbs vs 30lbs for stock dash.

This dash was molded off a stock 240Z dash, on which the glove box lid was eliminated. You can mount using the steel skeleton from the factory dash, or with your own mounting brackets (not supplied with the dash). You can cut vent holes in the stock locations on either side using a hole saw. The gauge recesses are not pre-cut, so you can use a variety of gauges, in place of the stock gauges, if desired.

IMG 2091IMG 2092IMG 2093IMG 2094


USA check
Made in the USA for reduced ordering time and less expensive shipping.
Ask a question
1000 characters left
Back to top