Like your Z, this site is always underconstruction. :-)

4" Quarter Panel FLARE ONLY

This is only the flare portion of the quarter panel (rear) that can be used as an over fender bonded to your existing metal quarter panel.

It can be used to attach to other quarter panels, for example, the 280ZX.  However, the metal panel will have to be trimmed for tire clearance.

Matching the profile would be a little trickier than on the fender, as the trim line will probably result in an edge that meets the metal at more of an angle than flat. So you may have to do a narrow layup of fiberglass across that edge to blend to the metal.

The finished width is approximately 4" wider than your stock fender, depending on exactly how much you trim the fiberglass.

* Each Side (referenced to left-hand drive models. LHD):

Many ZTrix components will work with this fender kit, including hoods, hood vents, fender vents, cowl panels, fiberglass doors, hatches, and taillight panels. And you can add any of our dashboards. All of these smaller parts can ship in the same crate as the fender kit, for no extra shipping cost

USA check
Made in the USA for reduced ordering time and less expensive shipping.
Ask a question
1000 characters left
Back to top